Step Rider:
|
|
|||
  |
DS1280 - Step Rider Lift'N Roll Handtruck Set Lift'N Roll The Lift'N Roll System consists of two short hand trucks which can be used to move machines and other large and heavy items. Operation is simple. You strap our two-unit Lift'N roll hand trucks on the opposite sides of your machine. The with a few twists of the wrist, the machine is easily lifted above the ground, automatically locked in place, and you are you are ready to roll to final placement. They can also be used to"clam shell" machines and other wide loads through a tight doorway. Simpley open the machine door and run the strap behind it. When you have finished the "clam shell" part of the move, you may gently lower the machine to the ground, and re-strap the load with the machine door closed. Floor clearance of 1/8" to 4 1/2' is possible with our hydrailis rams to insure the operator being able to clear low doorways or difficult thresholds. And, you can gently set the load down without damaging the floors. You're gonna love its smooth operation. Available in 1500 pound capacity. (read more...) |
Price: $825.00 | |
 |
DS1281 - Step Rider Model 1800 AC Only Model 1800 AC Only STEP RIDER The Cadillac of stair climbers recently got better. We offer models capable of moving up to 3500 pounds. Model 1800 is available in AC/DC and can be easily changed from one power source to the other even in the middle of a stair move. When the "Quad Pods", a set of 4 wheel-arms, are extended downward from the main frame, the Step Rider functions as a handtruck and rolls on 4 wheels, carring the machine at an angle with no weight on the operator. It will carry your machines up any number of flights, and easily turn those tight landings with no more than two men. (If the landings are too small for your macine, we have the answer to that problem as well, they're called "Expanda" Landings.) Remember, if you can't turn the landing, you can't complete the move! Here's a feature you're gonna love! The Step Rider will lay the load down on the stairs for you, all you have to do is flick the remote power switch. Step Rider is always perfectly balanced so the operator carries little or no weight. (read more...) |
Price: $4,295.00 | |
|
DS1282 - Step Rider Model 1800 AC/DC Model 1800 AC/DC STEP RIDER The Cadillac of stair climbers recently got better. We offer models capable of moving up to 3500 pounds. Model 1800 is available in AC/DC and can be easily changed from one power source to the other even in the middle of a stair move. When the "Quad Pods", a set of 4 wheel-arms, are extended downward from the main frame, the Step Rider functions as a handtruck and rolls on 4 wheels, carring the machine at an angle with no weight on the operator. It will carry your machines up any number of flights, and easily turn those tight landings with no more than two men. (If the landings are too small for your macine, we have the answer to that problem as well, they're called "Expanda" Landings.) Remember, if you can't turn the landing, you can't complete the move! Here's a feature you're gonna love! The Step Rider will lay the load down on the stairs for you, all you have to do is flick the remote power switch. Step Rider is always perfectly balanced so the operator carries little or no weight. (read more...) |
Price: $4,795.00 | |
 |
DS1283- Step Rider VMS Model 7210 VMS Model 7210 VMS Designed specifically to take large or tall loads through low doorways, the VMS has easiest breakbak of any handtruck. It looks somewhat like a handtruck, but unlike any handtruck you're ever seen. With its various sets of adjustable wheel arms, and swivel dolly, it allows the operator to pivot on a dime, hop 1 to 3 steps, and move machines from vertical or horizontal position, or almost any angle in between. Its wheel arms, and wheel- base width can be adjusted to accommodate narrow sidewalks, and it always rolls on four 6 inch wheels whether on the level or an incline. Best of all, it takes tall machines through doors WITHOUT the operator having to carry any of the weight and there is no danger of the load faling on him. (read more...) |
Price: $1,295.00 | |
 |
DS1280A - Step Rider Lift-N-Roll Jack Step Rider Lift-N-Roll Jack (read more...) |
Price: $36.95 | |
 |
DS1280B - Step Rider Lift-N-Roll Strap Step Rider Lift-N-Roll Strap (read more...) |
Price: $25.00 | |
 |
DS1280C - Step Rider Lift-N-Roll Caster Step Rider Lift-N-Roll Caster (read more...) |
Price: $28.95 | |
 |
DS1280D - Step Rider Lift-N-Roll Pressure Relief Handle w/Chain Step Rider Lift-N-Roll Pressure Relief Handle w/Chain (read more...) |
Price: $7.95 | |